Best Orange Juice Production Line, Apple Juice Production Line Sale, Pineapple Juice Production Line Suppliers, Juice Bottle Filling Machine Brands

The History Of Blow Molding And Its Advantages 2022-04-19

The hollow plastic products produced by the injection blowing process have the following advantages compared with the hollow plastic products produced by the extrusion process:

Common Blow Molding Process 2022-04-11

Extrusion molding, also known as extrusion molding, is mainly suitable for the molding of thermoplastics, and is also suitable for the molding of some thermosetting and reinforced plastics with good fluidity.

Common Shrink Wrap Problems And How To Fix Them 2022-03-18

The temperature of the heat-sealing knife of the sealing machine is too low, and the temperature of the heat-sealing knife can be increased. The sealing and cutting time is too short, and the sealing and cutting time can be increased.

Daily Maintenance Methods Of Shrink Packaging Machine 2022-03-17

Environmental conditions: The heat shrinking machine should be used in an environment where the temperature is -10°C-50°C, the relative humidity does not exceed 85%, and there is no corrosive gas in the surrounding air, no dust, and no explosion hazard.

How To Choose The Shrink Wrapping Machine You Need 2022-03-11

Generally speaking, there are two types of packaging, one is fully enclosed and the other is cuff type. The closed type is all wrapped, such as milk or cosmetic boxes on a plate, and the cuff type is a small opening on both sides, which is generally used for beverages, mineral water, beer, etc. These two shrinking machines are different, so be sure to determine the packaging form of your items.

What Is Water Treatment Technology? 2022-03-08

Wastewater can be used as a water source, and after treatment, it can be used for industrial water or even domestic water. The emergence of terms such as reclaimed water, recycled water, etc. reflects this situation.

What Are The Steps In A Water Treatment Plant？ 2022-03-03

The mechanical (primary) treatment section includes structures such as grids, grit chambers, primary sedimentation tanks, etc., for the purpose of removing coarse particles and suspended solids. The principle of treatment is to achieve solid-liquid separation through physical methods to separate pollutants from sewage. , which is a commonly used sewage treatment method.

The Working Principle Of The Three-In-One Filling Machine 2022-02-23

The filling method is isobaric rotary filling, the filling valve is specially designed, the filling speed is fast and stable, and the efficiency is high. The sealing part is automatically fed and sealed. Improvements have been made on the basis of the three-in-one small bottled water, which integrates bottle washing, filling and sealing. It is not used for the traditional in-line filling method for large bottles. The number of operators reduces labor costs.

Features of Beverage Filling Machine 2022-02-22

Adopt high-efficiency cap management system, with perfect cap feeding technology and protection device.

What Is The Injection Molding Machine Used For? 2022-02-17

Injection molding machine is also known as injection molding machine or injection machine, many factories are called beer machine (píjī), and injection molding products are called beer parts. It is the main molding equipment for making thermoplastic or thermosetting materials into various shapes of plastic products using plastic molding molds. According to the arrangement of injection device and clamping device, injection molding machine can be divided into vertical type, horizontal type and vertical-horizontal composite type.

3D Printing And Injection Molding 2022-02-17

Due to the wide availability of raw materials for injection molding, and its large-scale and rapid standardized production characteristics, it is also conducive to reducing the cost of a single product. Therefore, in terms of manufacturing costs, the cost of injection molding is much lower than that of 3D printing technology.